Presets:
60%
90°
10%
10°
1.0×
idle
Created by Mazen Al-Ghoul

2D Collision — H₂ + I₂ → 2 HI

energy • approach angle • impact parameter • orientation

1 · What you see

⚠ Scope note. The thresholds and timescales in this demo are pedagogical, not quantitatively accurate for H₂ + I₂. See §9 — Scope and accuracy below for what a real potential-energy-surface calculation would require.

A 2D model of a single collision. H₂ (two small blue spheres) approaches I₂ (two large purple spheres). Four sliders set the initial conditions; press ▶ Launch to fire the collision.

On a successful reaction, the I₂ fades out and two HI molecules fly apart — the H atoms keep their blue color and the I atoms keep their purple color (identity preserved), each HI shown with a green outline to mark it as a product.

2 · The contact point

The animation stops exactly when one H atom physically touches one I atom (distance = R_H + R_I = 41 px). This is computed from the actual geometry: for every H–I atom pair the quadratic giving the first time the two atoms are at their touching distance is solved, and the smallest positive root is taken as the contact time.

If no H–I pair ever gets close enough (a grazing miss), H₂ continues past without any contact.

3 · The geometry — annotated on the scene

4 · The four conditions for reaction

ConditionSliderPass threshold
EnergyEnergy≥ 40 %
Approach angle — perpendicular to I–IApproach θ60°–120°
Impact parameter — path near I–I axisImpact b≤ 25 %
H₂ orientation — H–H parallel to I–IH₂ orient.≤ 30° or ≥ 150°

All four green AND actual contact → I₂ disappears, 2 HI form. Otherwise bounce or miss.

5 · The five presets

PresetSettingsOutcome
PerfectE=60, θ=90, b=10, φ=10✓ contact → reaction
Wrong angleE=60, θ=20, b=10, φ=10contact but θ out of range → bounce
Wrong orient.E=60, θ=90, b=10, φ=90contact but both H on same I → bounce
Too slowE=20, θ=90, b=10, φ=10contact but energy below barrier → bounce
GrazingE=60, θ=90, b=70, φ=10✗ no contact — H₂ misses I₂

6 · The reactive window (sidebar heatmap)

A live θ (x) vs φ (y) grid colored green where a collision with those angles would succeed. The white crosshair shows the current (θ, φ). Threshold lines mark θ = 60°, 120° and φ = 30°, 150°.

If energy or impact parameters fail their thresholds, the whole window turns red — changing angles alone won't help.

7 · Why P_steric is small in real kinetics

Only a small fraction of (θ, φ, b) space gives a productive collision. Multiply the geometric constraint by the Arrhenius fraction and the true steric factor is 10⁻³ to 10⁻⁶ in real reactions.

8 · Experiments

A — perfect collision

Click Perfect → Launch. H₂ reaches I₂, atoms touch, I₂ fades and 2 HI (blue H + purple I) fly apart.

B — sweep θ

Fix E=60, b=10, φ=10. Sweep θ from 0° to 180°. H₂ touches I₂ across much of the range, but only reacts when 60° ≤ θ ≤ 120°.

C — sweep φ

Fix E=60, θ=90, b=10. Sweep φ. Reactions occur only near 0° and 180°. At φ=90°, both H atoms aim at the same I.

D — energy threshold

Fix θ=90, b=10, φ=10. Sweep energy from 100% to 0%. Below 40% the reaction stops even with perfect geometry.

E — grazing miss

Fix E=60, θ=90, φ=10. Sweep b. Above 25% the criteria fail; above ~60% the H₂ misses I₂ entirely and never touches it.

9 · Scope and accuracy — pedagogical vs. quantitative

The four thresholds in this demo — Energy ≥ 40 %, θ ∈ [60°, 120°], b ≤ 25 %, φ ∈ [0°, 30°] ∪ [150°, 180°] — are not the true reactive window for H₂ + I₂. They are cartoon stand-ins chosen by hand so that the AND-structure of the four conditions is visible in a few seconds. Some concrete ways this demo differs from a real kinetics calculation:

The real activation energy makes reactions astronomically rare

For H₂ + I₂ the experimental barrier is ~165 kJ/mol. At 700 K the Boltzmann fraction of collisions with enough energy to cross the barrier is:

exp( −165000 / (8.314 · 700) ) ≈ 10⁻¹³

If the demo used that number literally, you would need to launch on the order of 10¹³ collisions to see one product — at 60 fps, that's about five million years. The demo uses a hard 40 % threshold so you see a reaction every few seconds instead.

The real steric factor is 10⁻³ to 10⁻⁶

The angular windows used here (±30° on θ, ±30° on φ, small b) are much wider than the true productive region. On a real potential energy surface, only a small sliver of initial orientations produces HI — the rest recross the transition state and fall back to reactants. The demo's job is to make that sliver visible, so it is generous.

Real reactions are not instantaneous

On a real PES the 4-center transition state has a finite lifetime — tens to hundreds of femtoseconds — during which trajectories can still recross the barrier and revert. This demo treats "contact + thresholds satisfied" as sufficient, which is the pedagogical abstraction of the underlying dynamics.

How exact results are actually computed

To get the real reactive window and the real thermal rate constant k(T), you would:

  1. Construct a potential energy surface (PES) for the four atoms, either ab initio (quantum chemistry at thousands of geometries) or by fitting to experimental data. For H₂ + I₂, good surfaces exist in the literature (e.g. Boothroyd–Connor–Whitehead, and modern machine-learned PESs).
  2. Run quasiclassical trajectory (QCT) simulations — sample initial conditions from a Boltzmann distribution of translational, vibrational, and rotational states, integrate Hamilton's equations across the PES, and count which trajectories reach the product channel.
  3. Include quantum effects when they matter — tunnelling, zero-point energy, and reactive resonances require quantum reactive scattering rather than classical trajectories. Essential for light-atom transfers at low T.
  4. Bin the results by (E, θ, φ, b) to extract the reactive window — this is exactly what the demo's four thresholds are a stylized version of.
  5. Integrate that window over the Maxwell–Boltzmann distribution to obtain k(T), then compare to experimental rates from the literature (e.g. NIST Chemical Kinetics Database).

What this demo captures correctly

What this demo does not capture

💡 Take-away. Treat this page as a visual intuition pump for the concept of collision theory — energy barrier + geometric selectivity + impact parameter — rather than a quantitative kinetics calculator. For quantitative work, use published potential energy surfaces with QCT or quantum scattering; for thermal rate constants in engineering or teaching, use experimental data or tabulated NIST/NIST-JANAF results.

10 · Controls

▶ Launch / Space — fire one collision. ↺ Reset / R — clear history. Preset buttons — load a scenario and auto-launch. ? / H — help. Esc — close.

💡 A fruitful collision requires four independent conditions plus actual atom–atom contact. The demo shows the products keeping their original atom colors — H stays blue, I stays purple — because in a chemical reaction the atoms don't change; only their bonding changes.