1. Gibbs Free Energy & Cell Electromotive Force (EMF)
An electrochemical cell converts the chemical Gibbs free energy of a redox reaction directly into electrical work. At constant temperature T and pressure P, the maximum non-expansion electrical work obtainable per mole of reaction is related to the reversible cell potential E_cell by:
w_elec,max = Δ_r G = −n · F · E_cell and Δ_r G° = −n · F · E°_cell = −R T ln K_eq
2. The Nernst Equation (Walther Nernst, 1889)
E_cell(T, Q) = E°_cell(T) − (R T / n F) · ln Q = E°_cell(T) − (2.3026 R T / n F) · log₁₀ Q
3. Concentration Cells & Battery Discharge to Equilibrium
- Concentration Cell (Preset 4): Select identical electrodes on both sides (e.g., Cu²⁺/Cu on Left and Right). Even though E°_cell = 0.000 V, setting [Cu²⁺]_L = 0.001 M and [Cu²⁺]_R = 2.00 M generates a spontaneous voltage E_cell = (RT/2F) ln([Cu²⁺]_R / [Cu²⁺]_L) ≈ +98 mV driven purely by entropy of mixing!
- Battery Discharge (⚡ Discharge): Click the Discharge button to close the circuit and watch [Anode ion] rise while [Cathode ion] depletes. On the Nernst plot, the operating point slides down the Nernst line toward log₁₀ Q = log₁₀ K_eq where E_cell = 0 V and ΔG = 0 (a dead battery at chemical equilibrium).
4. Standard Reduction Potentials at 298.15 K (vs. SHE)
| Half-Cell Couple |
Reduction Half-Reaction |
E° (298 K) [V] |
dE°/dT [mV/K] |
| Mg²⁺ / Mg(s) | Mg²⁺(aq) + 2 e⁻ ⇌ Mg(s) | −2.372 V | +0.18 mV/K |
| Zn²⁺ / Zn(s) | Zn²⁺(aq) + 2 e⁻ ⇌ Zn(s) | −0.762 V | +0.10 mV/K |
| Fe²⁺ / Fe(s) | Fe²⁺(aq) + 2 e⁻ ⇌ Fe(s) | −0.447 V | +0.05 mV/K |
| Pb²⁺ / Pb(s) | Pb²⁺(aq) + 2 e⁻ ⇌ Pb(s) | −0.126 V | −0.45 mV/K |
| 2H⁺ / H₂(g) (Pt) | 2H⁺(aq) + 2 e⁻ ⇌ H₂(g, 1 bar) | 0.000 V (Reference) | 0.00 mV/K |
| Cu²⁺ / Cu(s) | Cu²⁺(aq) + 2 e⁻ ⇌ Cu(s) | +0.342 V | −0.55 mV/K |
| Fe³⁺ / Fe²⁺ (Pt) | Fe³⁺(aq) + e⁻ ⇌ Fe²⁺(aq) | +0.771 V | +1.18 mV/K |
| Ag⁺ / Ag(s) | Ag⁺(aq) + e⁻ ⇌ Ag(s) | +0.800 V | −1.00 mV/K |
5. Electrode Kinetics: The Butler–Volmer Equation
Thermodynamics tells us whether a reaction is favourable. Kinetics tells us how fast it proceeds. At an electrode, the rates of the anodic (oxidation) and cathodic (reduction) partial reactions depend exponentially on the overpotential η = E − E_eq:
j = j₀ · [ exp( α_a · n F η / RT ) − exp( −α_c · n F η / RT ) ]
where j₀ is the exchange current density (a measure of intrinsic catalytic activity), α_a + α_c = 1 are the anodic/cathodic charge-transfer coefficients (typically ≈ 0.5), and n is the number of electrons transferred.
- Exchange current density j₀: The rate at which the forward and reverse reactions proceed at equilibrium (η = 0). It spans ten orders of magnitude across materials: Pt HER ≈ 10⁻³ A/cm², Hg HER ≈ 10⁻¹² A/cm², Pt ORR ≈ 10⁻⁹ A/cm². A high j₀ = a good electrocatalyst.
- Charge-transfer coefficient α: Describes how the interfacial potential drop is partitioned between the forward and reverse barriers. Usually ≈ 0.5, but can deviate for complex multi-step mechanisms.
- Current density: Normalised to geometric electrode area (A/cm²). Positive j = anodic (oxidation), negative j = cathodic (reduction).
6. The Tafel Equation (High-Overpotential Limit)
When |η| ≫ RT/nF (typically |η| > 50–100 mV), one branch of the Butler–Volmer equation dominates, and we obtain the Tafel equation:
η = b · log₁₀( |j| / j₀ ) where b_a = 2.303 RT / (α_a n F) and b_c = 2.303 RT / (α_c n F)
- Tafel slope b: At 298 K, 2.303 RT/F = 59.16 mV, so b = 59.16 / (α n) mV/decade. For α = 0.5, n = 2: b = 59.2 mV/decade. A smaller Tafel slope means the current increases faster with overpotential — better kinetics.
- Tafel plot: Plot log|j| vs η. The linear region's slope gives the Tafel slope, and extrapolation to η = 0 gives log j₀. This is the standard experimental method for measuring exchange current densities.
7. Mass Transport & the Limiting Current
The Butler–Volmer equation describes activation-controlled kinetics. When the reaction is fast enough that reactant supply becomes rate-limiting, the current saturates at the diffusion-limited current density:
j_lim = n F D C_bulk / δ (Nernst diffusion layer model)
Combining activation and mass-transport control (Koutecký–Levich):
1/j = 1/j_kin + 1/j_lim ⇒ j = j_kin · j_lim / (j_kin + j_lim)
- Kinetic control: j_kin ≪ j_lim — current follows Butler–Volmer (exponential Tafel region).
- Mixed control: j_kin ≈ j_lim — current bends away from the Tafel line.
- Mass-transport control: j_kin ≫ j_lim — current plateaus at j_lim (horizontal line on Tafel plot).
8. Electrocatalysis Examples (Kinetics Mode Presets)
| System | Reaction | j₀ (A/cm²) | Typical Tafel slope | Significance |
| Pt | HER | 2H⁺ + 2e⁻ ⇌ H₂ | 10⁻³ | ~30 mV/dec | Benchmark HER catalyst; near-thermoneutral |
| Hg | HER | 2H⁺ + 2e⁻ ⇌ H₂ | 10⁻¹² | ~120 mV/dec | Classic high-overpotential electrode (polarography) |
| Ni | HER | 2H⁺ + 2e⁻ ⇌ H₂ | 10⁻⁵ | ~60 mV/dec | Practical alkaline electrolyser cathode |
| Pt | ORR | O₂ + 4H⁺ + 4e⁻ ⇌ 2H₂O | 10⁻⁹ | ~60–120 mV/dec | Fuel-cell cathode; sluggish kinetics limit efficiency |
| IrO₂ | OER | 2H₂O ⇌ O₂ + 4H⁺ + 4e⁻ | 10⁻⁴ | ~50–70 mV/dec | Best OER catalyst in acid; water electrolysis |
| Cu | Deposition | Cu²⁺ + 2e⁻ ⇌ Cu | 10⁻³ | ~60 mV/dec | Electroplating; interconnect metallisation |
| Fe | Corrosion | Fe ⇌ Fe²⁺ + 2e⁻ | 10⁻⁶ | ~40–60 mV/dec | Anodic dissolution; rust formation |